Yamaha FJR 1300A

1298 cc / 79.2 cu-incc, DOHC, 16-valve, liquid-cooled in-line four engine delivers massive power and torque (145 hp @ 8500 rpm and 99.1 ft-lbs of torque @ 6000 rpm) for an unequaled spread of muscle over a wide RPM range. Red line is a low 9,000 rpm for extended engine life.

State-of-the-art engine uses advanced technology found on the legendary R1 such as a slant block design, stacked "Tri-Axis" transmission, fuel injection etc.

One-piece cylinder and upper crankcase assembly provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

Engine is a fully stressed chassis member, allowing for a lightweight frame design.

Lightweight forged pistons with carburized connecting rods provide superb strength and reduced reciprocating mass for outstanding engine response and durability.

Ceramic composite cylinder bores ensure greater heat dissipation, reduced frictional losses and extended cylinder wear life.

Specially designed four-valve per cylinder head features compact, side-driven double-overhead camshafts providing outstanding low to mid rpm torque and horsepower for effortless sport touring and effortless passing power.

Advanced electronic fuel injection (EFI) system is ideal for long-distance sport-touring. The 42mm throttle body fuel injection system with 4-hole Nippon injectors delivering crisp, seamless throttle response regardless of weather or altitude. This system also enhances fuel economy, reduces emissions and offers instant, choke-free starting.

EFI system features a Throttle Position Sensor (TPS), which monitors throttle position and, in conjunction with a variety of sensors (air intake temperature/pressure, atmospheric pressure, coolant temperature, crankshaft position and engine rpm), ensures precise injection intervals and ignition timing for optimal engine performance.

Revised throttle pulley shape for improved driveability … smoother throttle action and improved throttle feeling (throttle cables connect to the throttle pulley which is connected to the throttle bodies).

Specially designed, low-vibration crankshaft features two gear-driven secondary counterbalancers delivering a smooth ride, which enhances both rider and passenger comfort.

Compact engine design uses a stacked "Tri-Axis" transmission (transmission shafts are stacked to minimize powerplant size front to back). The stacked design reduces engine length and centralizes mass, thereby allowing the engineers the ability to place the engine in the "sweet spot" of the frame for optimized front and rear weight distribution which provides excellent handling characteristics.

Revolutionary wide ratio, 5-speed transmission with newly designed Yamaha Chip Control Shifting (YCC-S) utilizes widely spaced gear ratios to deliver relaxed long-distance sport touring performance combined with seamless acceleration … all without a have to engage or disengage a clutch.

Middle gear damper spring load is increased for improved feeling at clutch engagement and better shifting feel overall.

Revised 3rd and 4th pinion gears feature an additional engagement dog for improved shifting feeling

Yamaha Chip Controlled shifting (YCC-S) is an industry first on a sport touring machine. The most noticeable difference is the lack of a clutch lever on the FJR1300AE. The YCC-S system uses two electronically controlled actuators … one for the clutch and one for shifting. The rider has the option of shifting with via a conveniently located handlebar switch or using the conventional foot shifter. The big difference is there is no clutching involved. Shift changes are smoother than a conventional manual clutch system and the foot shifter effort has been reduced with this system. The benefit is improved rider comfort due to the elimination of clutch hand fatigue especially in stop and go traffic plus reduced foot shifter effort. NOTE: This system is not an automatic shift system … the rider still must shift the bike, but without worrying about the clutch.

Revised clutch boss shape and increased oil supply to the clutch for improved feeling at the engagement point.

Revised YCC-S hand shift lever shape. The up shift YCC-S hand shift lever has a revised shape for improved shifting feel.

Special scissors-type primary driven gear helps prevent drivetrain backlash and significantly reduces transmission noise for great rider comfort.

Optimized middle drive / driven gear ratio for improved ride comfort at lower rpms.

Clean, quiet shaft drive system is super-durable and low maintenance. This system features mechanical cam dampers in the drive pinion for quieter, smoother power delivery to the rear wheel.

4-into-1-into-2 stainless steel exhaust optimizes engine performance across the power band and utilizes four three-way catalytic converters to reduce emissions. Two are located in the junction "box" under the engine and one in each muffler. Combined with the Air Induction System (AIS), the FJR1300AE is one of the cleanest-running large-capacity motorcycle engines ever built. It easily exceeds the strict European EU-3 emission standards.

Heated oxygen sensor (O2) provides precise fuel - air ratio information to the fuel injection system to reduce emissions even further, especially at lower engine temperatures.

Curved radiator uses twin "ring-type" fans for great heat dissipation and to aid in moving the hot air out of the cowl area for optimized air management and less heat to the rider. Ring type fans "pulls" more air than a conventional type fan.

Easy-access cartridge-type spin-on oil filter makes oil changes a snap.

High capacity oil filter and large volume of engine oil (5 liters ) provides extended service intervals between oil changes.

Excessive lean angle cutout switch prevents the engine from running in the event of a tip over. The switch will activate at 70 degrees.

Revised engine ECU (electronic control unit) settings for improved driveability.

New lighter YCC-S ECU (electronic control unit for the auto clutch) reduces overall unit weight.

Cast aluminum twin spar, diamond-type frame, features massive twin spars. This frame design is incredibly light and extremely rigid, the perfect combination for sharp, sportbike-like handling.

Fully detachable aluminum rear subframe helps reduce weight while permitting easier rear shock access/maintenance.

Lightweight, cast aluminum swingarm. The special swingarm design incorporates the shaft drive into its left side to reduce unsprung weight for incredible handling and suspension performance.

Key chassis geometry figures include: caster angle = 26 degrees and trail of 109mm.

Fully adjustable 48mm cartridge-style forks offer 135mm (5.4") of wheel travel. The adjustable design allows the rider to tailor suspension settings to match rider weight, load and road conditions. Fork adjustments include: 5 - way spring preload, 21 - way compression damping and 17 - way rebound damping.

Adjustable link Monocross rear suspension with 125mm (4.8") of wheel travel features a handy, two-stage (hard/soft) spring preload adjustment lever that allows the rider to easily switch between solo and two-up preload settings. Other rear shock adjustments include: 18 - way rebound damping.

Dual 320mm front discs are squeezed by Nissin 4-piston calipers with independent brake pads for each piston. Computer controlled ABS is now standard on the FJR1300AE.

All new ABS system for 2007. The ABS or Anti Lock Braking System now features a linear controlled 3 position system (Vs 2 position in the past), an ECU integrated compact hydraulic unit and a new active type wheel sensor with a new magnetic rotor. The benefit is a reduced weight and better lever feedback feeling when the system is operating. The benefit of ABS is excellent control under hard braking or braking on wet or slippery surfaces. The ABS system prevents wheel lock up.

Unified braking system with computer controlled ABS. When the front brake is applied, all 4 - LHS front caliper pistons are activated, while only the "upper" two pistons on the RHS front caliper are activated. When applying the rear brake, both rear caliper pistons are activated plus the two lower pistons on the front RHS caliper.